MC — Maintenance & tooling
MC200
3-direction spray cleaning of frames and maintenance parts
Cleaning flux frames and flux traps — usually a heavy, messy operation — handled by 3-direction spray and a rotating basket. Short cycle, water-based chemistry, no water rinse or compressed air.
Application
The MC200 cleans wave soldering frames, internal parts, oven filters and parts, conformal coating frames and placement machine nozzles. 3-direction spray combined with a rotating basket ensures a short cycle, even on old, baked-on residues. The process runs in a closed loop, with no water rinse or compressed air, and hot-air drying.
Benefits
- 3-direction spray + rotating basket
- Short cycle, even on old baked-on residues
- Closed loop, water-based chemistry
- No water rinse
- No compressed air required
- Hot-air drying
Technical specifications
Footprint & weight
| Metric | Imperial | |
|---|---|---|
| Dimensions (W × D × H) | 1 500 × 1 000 × 1 300 mm | 59,1 × 39,4 × 51,2 in |
| Weight | 250 kg | 551 lb |
Process
| Metric | Imperial | |
|---|---|---|
| Wash volume | 80 L | 21,1 US gal |
| Basket | Ø 750 mm × 600 mm | Ø 29,5 in × 23,6 in |
| Maximum load | 300 kg | 661 lb |
| Cycle | 10 min lavage / 10 min séchage | 10 min wash / 10 min drying |
Power supply
| Metric | Imperial | |
|---|---|---|
| Electrical | 400 V triphasé · 50 Hz · 16 A · ±5 % | 400 V three-phase · 50 Hz · 16 A · ±5% |
Frequently asked questions
Does the MC200 clean baked-on flux residues?
Yes. The 3-direction spray and rotating basket ensure a short cycle even on old, baked-on flux frames — usually a heavy, tedious operation.
Is a water or compressed-air supply needed?
No. The process runs in a closed loop with water-based chemistry, with no water rinse or compressed air. Drying is done with hot air.
Is this the machine you need?
Let's talk about your parts, your contaminants and your throughput. We validate the process on real trials.
